Micro-photography (9) clinical CRO
Micro-photography (9)- CRO drugs research
DMLB-type microscope with a Leica MPS 30/60 type microscope photography controller procedures drugs R&D
(1) cleaning of the microscope, mechanical, electrical, optical components, cameras, and automatic exposure control device clear scold. The stringent requirements not only to clean the instrument, but also tables, chairs, floors are kept clean, indoor dust as little as possible.
(2) then the power will be LEICA DMLB-type microscope and LEICA MPS 30/60 automatic exposure controller connected to the regulator's output power wiring outlet 210V ~ 215V on the plate.
(3) turn on the switch microscope, revealing the left semi-circular black base transfer board, be transferred out of the 1 ~ 2V point, and then open the mirror on the left front seat of the red switch, mirror seat out of weak transmission of light when the filament Preheat 1 to 2 minutes before calling. drugs research contract
(4) transfer binocular microscope eyepiece with the focus first on the left, spin manhandled focusing spiral, so that the slide near the loading station 10 Ã- objective lens, and then his left eye to see on the left eyepiece, look down while loading station, when the see the samples as the organization's clear again after fine-tuning to the most explicit so far. Then transfer the right eyepiece, this time not to tune coarse, fine focusing screw, just tune up and down on the right eyepiece thread, so that the right field of vision in the eyepiece focal length of specimens transferred to the organization as the most clear and up. At this time, the left and right eyepiece that is able to adapt to the same focus of your eyes. Shenzhen Pharmaceutical Factory
(5) adjusted Pupil Hold the binocular tube with both hands, while stretching outside look inside, side view with the eyes to observe the specimens, so that the two merged into a circular field of vision until the vision.Servier Laboratories